Our Verdict
Compare to Similar Products
![]() This Product
Sunbeam Classic GCSBC | |||||
---|---|---|---|---|---|
Awards | ![]() | ![]() | |||
Price | $38 List $35.87 at Amazon | $55 List | $55 List $49.93 at Amazon | $25 List $21.65 at Amazon | $25 List Check Price at Amazon |
Overall Score ![]() |
|||||
Star Rating | |||||
Pros | Lightweight, good detailing | Great steam output, crisp ironing performance, large water tank, excellent digital display | Powerful steam burst, pointed nose for precision, budget-friendly | Inexpensive, portable | Lightweight, easy to handle, prominent dial |
Cons | Poor steam output, not great on linen, unimpressive heating, remedial interface | Large and bulky, not ideal for detailing, heavy to maneuver | Just average steam output, heating is just okay | Lacking in power, underwhelming ironing performance | Low steam output, water tank has no lid, average ironing performance |
Bottom Line | Here, "classic" means old-school, simple, and lacking in many of the technological features and advances most other irons have | A favorite among our testing team, this large iron left our sheets satisfyingly pressed | A high-performing iron equipped with a powerful steam burst and the ability to effectively maneuver across most fabrics and most wrinkles | A steam iron that is perfect for travel but is too weak for regular chores at home | With poor steam output and no cover for the water tank, this lackluster iron doesn't impress us |
Rating Categories | Sunbeam Classic GCSBC | PurSteam Pro 1800W | Black+Decker D3030... | Sunbeam Hot-2-Trot | Black+Decker Easy S... |
Ironing Performance (40%) | |||||
Steam Output (25%) | |||||
Heating (15%) | |||||
Detailing (10%) | |||||
Ease of Use (10%) | |||||
Specs | Sunbeam Classic GCSBC | PurSteam Pro 1800W | Black+Decker D3030... | Sunbeam Hot-2-Trot | Black+Decker Easy S... |
Wattage | 1200W | 1800W | 1600W | 800W | 1200W |
Weight (without water) | 2.3 lbs | 2.9 lbs | 1.9 lbs | 1.3 lbs | 1.6 lbs |
Cord Length | 8' 1" | 8' | 8' | 8' | 7' 10" |
Soleplate Material | Non-Stick | Ceramic | Stainless Steel | Non-Stick | Stainless Steel |
Measured Steam Output (over 5 minutes) | 33 g | 105 g | 87 g | 12 g | 39 g |
Average Temperature (after 5 minutes on High) | 312° F | 335° F | 328° F | 380° F | 318° F |
Number of Steam Holes | 29 | 64 | 23 | 7 | 21 |
Our Analysis and Test Results
The Sunbeam Classic is a simple iron with basic features. It puts out very little steam and doesn't get as hot as others, but it has an effective nose that makes it a solid choice for detailing.
Performance Comparison
Ironing Performance
The Sunbeam Classic took more passes to get wrinkles out than most of our tested models. It works best on cotton, needing about four passes to completely smooth the fabric. The steam boost was necessary to get the most stubborn wrinkles out, but we found its performance on cotton, silk, and satin to be reasonable, if not particularly noteworthy. It didn't perform as well on linen or polyester, though, requiring many more passes over the fabric to smooth them completely. We were unable to achieve that crisp look on linen, despite spending more time and more steam bursts working on it. The Classic has fewer steam vents than almost any other model we tested, though its performance close to the nose was above average.
Steam Output
Measuring the standard steam output of the Sunbeam Classic revealed further shortcomings. It emitted very little steam compared to the rest of our lineup. Materials we ironed never felt particularly saturated with steam, and this lack of water directly translated into a longer and more arduous ironing experience. It does have a larger divet around the hole on the nose, though, which extends the steam closer to the point of the iron. Where the rest of the ironing experience fell short, the Classic delivered adequate steam to the material at the tip of the iron.
Heating
The Sunbeam Classic came in well under the average temperature among the irons we tested. The particular one we tested ended up far warmer on the right side than the left (344°F vs. 300°F, respectively). Its average soleplate temperature was 311°F, which is far below average for the ones we tested. While most irons' coolest area of the soleplate is the bottom, the Sunbeam's bottom section measured even lower than expected, hitting just 262°F. On the other hand, its nose proved its hottest point, averaging 345°F.
Detailing
Because of its hotter nose and extra steam at its tip, the Sunbeam Classic does an excellent job with detailing work. It's a mid-sized iron with a thinner body overall, making it easier to fit between buttons and into corners. It's one of the lightest irons we tested and glides smoothly across fabrics. With a good solid grip and no buttons in the way, maneuvering this neat iron to get out wrinkles in harder-to-reach areas was a cinch.
Ease of Use
With a cord just over 8 feet long, the Classic allows plenty of space for you to move around. It doesn't have a great cord storage system, though, and we ended up just wrapping it through the handle to get it to stay. Lacking a nuanced indicator system, the single red light stays lit throughout the heating process, leaving you to wonder when it's hot enough to use. It blinks before the auto shut-off engages, but there are no beeps or other cues to keep you updated if you're not looking at it. The opening to the water tank is very small, requiring a tedious trickle to fill. However, the additional steam function is one of our favorites, emitting a fine mist that we wish all other irons were capable of. This function greatly enhances the overall ironing experience.
Should You Buy the Sunbeam Classic GCSBC?
The Classic is an affordably priced iron with all the basic functions most people will need. It doesn't get as hot as many others, nor does it let off as much steam. However, its nose has the heat and steam combination to give it great detailing performance. This budget-friendly model can still be a solid choice for folks who don't need the high heat and steam for quick big jobs but instead are looking to accomplish small, detailing jobs.
What Other Irons Should You Consider?
Where the Sunbeam Classic is best for smaller jobs, the PurSteam Pro 1800W has the size, heat, and impressive steam output to make quick work of big jobs — and still for a reasonable price. The Chi Steam Titanium is another great option, with excellent all-around performance on all fabrics, and it's easy to use and not too hard on the wallet.
Ad-free. Influence-free. Powered by Testing.
GearLab is founded on the principle of honest, objective, reviews. Our experts test thousands of products each year using thoughtful test plans that bring out key performance differences between competing products. And, to assure complete independence, we buy all the products we test ourselves. No cherry-picked units sent by manufacturers. No sponsored content. No ads. Just real, honest, side-by-side testing and comparison.
Learn More